1. Why choose glass manufacturing water treatment equipment ?
Glass manufacturing is a complex process that requires a significant amount of water for various operations.
Ensuring the quality and proper treatment of this water is crucial not only for the efficiency of the manufacturing
process but also for environmental compliance. This is where glass manufacturing water treatment comes into play.
Water treatment in glass manufacturing serves multiple purposes. Firstly, it helps to remove impurities and contaminants
from the water used in the production process. These impurities can include suspended solids, dissolved minerals,
chemicals, and organic matter. By purifying the water, the quality of the final glass product is enhanced, reducing defects
and improving its clarity and strength.
2. Glass manufacturing water treatment solution
The treatment process of this system is to collect wastewater discharged from multiple glass edging machine or beveling machine, drill machine, CNC etc into a wastewater collection pool, an aeration system is installed at the bottom of the wastewater collection pool to prevent glass powder from settling at the bottom of the pool and ensuring glass powder’s concentration distribute more evenly in the water. Compared to traditional sedimentation devices, this aeration system can let all glass powder pump to the integrated reaction tank for wastewater treatment.
The wastewater is pumped to the integrated reaction tank, at the same time, the flocculant-mixed wastewater is pumped to the integrated reaction tank through the dosing system for wastewater treatment. The integrated reaction tank integrates water pumping, dosing, reaction, and drainage. The treated clean water is discharged to the clean water collection pool for glass edge grinding, which can greatly reduce the blockage and damage of the water nozzle of the glass edge grinding machine, extend the service life of the machine and improve the edge grinding efficiency.
The solid waste treated by the efficient integrated reaction tank is discharged into the sludge collection pool. and then pumped to the filter press to press it into a solid glass cake. the filtered clean water can be discharged to the wastewater collection pool or clean water collection pool.
3. Edging Wastewater Treatment System Configuration
4.Treatment water quality effect
| No | Item | Water intet quality | Purified water quality |
| 1 | PH | Edging wastewater | 6~9 |
| 2 | SS(mg/L) | Edging wastewater | <30 |
| 3 | COD(mg/L) | Edging wastewater | <60 |
| 4 | Color | Edging wastewater | <30 |
| 5 | AMMONIA(mg/L) | Edging wastewater | <25 |
5. More than 600 installation cases in total
